air operated stainless steel butterfly valve

Body: Stainless Steel,CF8,CF8M,CF3M
Disc: Stainless Steel CF3M,CF3,CF8M, Nylon Coated Ductile Iron, Aluminum Bronze, Double Stainless Steel,2507,1.4529
Stem: Stainless Steel
Seats: NBR,EPDM,PTFE,VITON, FKM* Polyurethane
Size: 1″ – 40″ (25mm – 1000mm)
Flange accommodation: EN 1092 PN 6/PN10/PN16
ASME Class 150
AS 4087 PN 10/ PN 16
JIS 5K/10K







    Description

    resilient seated butterfly valve surpasses the high standards required in sanitary valve applications, and inherent flow characteristics and capabilities. valve is a wafer version with flange locating holes, and is the companion lug version for dead-end service and other flange requirements.

    Description
    Body: Stainless Steel,CF8,CF8M,CF3M
    Disc: Stainless Steel CF3M,CF3,CF8M, Nylon Coated Ductile Iron, Aluminum Bronze, Double Stainless Steel,2507,1.4529
    Stem: Stainless Steel
    Seats: NBR,EPDM,PTFE,VITON, FKM* Polyurethane
    Size: 1″ – 40″ (25mm – 1000mm)
    Flange accommodation: EN 1092 PN 6/PN10/PN16
    ASME Class 150
    AS 4087 PN 10/ PN 16
    JIS 5K/10K
    Top flange:ISO5211
    Temperature range: -40 °C to + 200 °C (depending on pressure, medium and material)
    Body style: wafer
    Applications: Potable Water, Wastewater, Seawater, HVAC

    Sanitary & Chemical applications
    One-piece disc/stem
    High Cv, low pressure drop

    Pneumatic Actuator
    Output Torque 10Nm to 8000 Nm
    Control: Double acting,Single acting normally closed, acting,Single normally open
    Pneumatic accessories: Solenoid valve, limit switch box , filter, E/P positioner, hand wheel

    All double acting and spring return units are suitable for both on/off and throttling applications. Actuators which can be actuated with other media such as hydraulic oil or water are also available as an option.

    1, Two independently adjustable travel stop screws and a cam on the output shaft to permit precise bidirectional adjustment of movement in both the open and closed positions for quarter turn valves (+5° to -5° limit adjustment)
    2, Integral porting
    3, Standard units have anodized aluminum bodies with polyester coated end caps.
    4, Special coatings and materials available for corrosive environments
    5, NAMUR accessory compatible