thread elaectric 3 way ball valve

3-way Screw End Ball Valve, Direct Mounting Type
ISO 5211 Pad for Direct Actuation
1/4” ~ 2” Full Port
Body: CF8M/CF8/WCB
Seats: TFM 1600 / PTFE / R-PTFE
Ends: BSP, BSPT, NPT, DIN, ISO
TA-LUFT Approved
Available in L-port or T-port







Description

Description
3-way Screw End Ball Valve, Direct Mounting Type
ISO 5211 Pad for Direct Actuation
1/4” ~ 2” Full Port
Body: CF8M/CF8/WCB
Seats: TFM 1600 / PTFE / R-PTFE
Ends: BSP, BSPT, NPT, DIN, ISO
TA-LUFT Approved
Available in L-port or T-port

Design features:
Built-in ISO 5211 Direct mounting pad easy automation
frie safe design approved
Anti-static devices for ball-stem-body
Blow-out proof stem
Pressure balance hole in ball slot
TA-LUFT design approved
Casting boss on body for draining

Electric Actuator
Output Torque 50Nm to 2000 Nm)
Control: ON-OFF type、Regulation type
Control signal: 4-20 mADC、0-5 VDC、0-10 VDC
Power: 12 VDC,24 VAC,24 VDC,220 VAC,120 VAC,380 VAC 50/60 Hz ±10%
Water-proof actuator:IP67

Option specification:
Explosion-proof actuator: Exd II CT5
Water-proof actuator:IP67
1, CE certification of most units
2, Wiring directly to the terminal strip without interference from other components
3, Simple and unique manual override handwheel system
4, Lowest profile and lightest weight actuator on the market
5, Simple finger or screwdriver adjustment of travel limit cams without interference from other components
6, Highly visible valve status display on most units

Three way L type flow diagram

Three way L type flow diagram

Three way T type flow diagram

Three way T type flow diagram

thread bsp electric 3 way ball valve