Body: Cast Iron, Ductile Iron, Aluminum Stainless Steel,CF8,CF8M,CF3M
Disc: Stainless Steel CF3M,CF3,CF8M, Nylon Coated Ductile Iron, Aluminum Bronze, Double Stainless Steel,2507,1.4529
Stem: Stainless Steel
Seats: NBR,EPDM,PTFE,VITON, FKM* Polyurethane
Size: 1″ – 40″ (25mm – 1000mm)
Flange accommodation: EN 1092 PN 6/PN10/PN16
ASME Class 150
AS 4087 PN 10/ PN 16
Temperature range: -40 °C to + 135 °C (depending on pressure, medium and material)
Body style: LUG
Applications: Potable Water, Wastewater, Seawater, HVAC
Sanitary & Chemical applications
High Cv, low pressure drop
Without pin design: Double D transmission between disc and shaft is strong and reliable.
Stainless steel retainer preventing stem blow-out.
Hard back ring keeping the rubber from seat distortion.
Multi-standard alignment holes suitable for various standard of flanges.
Output Torque 10Nm to 8000 Nm
Control: Double acting,Single acting normally closed, acting,Single normally open
Pneumatic accessories: Solenoid valve, limit switch box , filter, E/P positioner, hand wheel
All double acting and spring return units are suitable for both on/off and throttling applications. Actuators which can be actuated with other media such as hydraulic oil or water are also available as an option.