Lining PTFE pneumatic 3 way ball valve

3-way Screw End Ball Valve, Direct Mounting Type
1/2” ~ 4” Full Port
Body: SS304,SS316,SS316L
with ISO 5211 direct mounting pad
Available in L-port or T-port
with real locking function
Seats: PTFE
Ends: BSP, BSPT, NPT, DIN, ISO, clamp
Pressure: PN16
Ball type can be L/ T/ X/ I-port







Description

Description
3-way Screw End Ball Valve, Direct Mounting Type
1/2” ~ 4” Full Port
Body: SS304,SS316,SS316L
with ISO 5211 direct mounting pad
Available in L-port or T-port
with real locking function
Seats: PTFE
Ends: BSP, BSPT, NPT, DIN, ISO, clamp
Pressure: PN16
Ball type can be L/ T/ X/ I-port

Self Cleaning Design for option
Media self cleans the valve cavity all the time when the liquid running through the valves
Remove the media in the valve cavity by the miedia itself
Easy to flush and clean the interior valve by water or steam

Pneumatic Actuator
Output Torque 10Nm to 8000 Nm
Control: Double acting,Single acting normally closed, acting,Single normally open
Pneumatic accessories: Solenoid valve, limit switch box , filter, E/P positioner, hand wheel

All double acting and spring return units are suitable for both on/off and throttling applications. Actuators which can be actuated with other media such as hydraulic oil or water are also available as an option.

1, Two independently adjustable travel stop screws and a cam on the output shaft to permit precise bidirectional adjustment of movement in both the open and closed positions for quarter turn valves (+5° to -5° limit adjustment)
2, Integral porting
3, Standard units have anodized aluminum bodies with polyester coated end caps.
4, Special coatings and materials available for corrosive environments
5, NAMUR accessory compatible

Three way L type flow diagram

Three way L type flow diagram

Three way T type flow diagram

Three way T type flow diagram

Lining PTFE pneumatic 3 way ball valve

Lining PTFE pneumatic 3 way ball valve